CSE060-0091-00 Castle Creations 1721 Sensored 4-Pole Brushless Motor (2400kV) (Castle Creations)

CSE060-0091-00 Castle Creations 1721 Sensored 4-Pole Brushless Motor (2400kV)

Part Number: CSE060-0091-00
Quantity In Stock: 1

CSE060-0091-00 Castle Creations 1721 Sensored 4-Pole Brushless Motor (2400kV)

 

Product #: 060-0091-00

 

MOTOR  APPLICATION
1721-2400Kv     Ideal for extreme speed and drag setups running up to 8s LiPo in 1:8 and 1:7 scale vehicles.  

The 1721-2400Kv motor is an exclusive offering available to those that are ready to take their extreme speed and drag setups to the next level.

Please read all product use statements and disclaimers before purchasing and installing this motor.

Ideal for running up to 8s LiPo in 1:8 and 1:7 scale vehicles, the mechanical design boasts a stainless-steel sleeve to reinforce and strengthen the rotor for high RPM operation. Coupled with a massive 8mm stainless steel motor shaft, 8.0mm bullets and high strand, low resistance, silicone coated 8 gauge copper wire, the 1721-2400Kv will deliver massive power and maximum top end speed. 

 

Castle products are backed by the industry's best service and support. Due to the extreme nature of this motor and its uses, we do not provide a warranty for the 1721-2400Kv motor. The integrity of the design has been proven and each motor is fully inspected and tested prior to shipment. This motor is intended for experienced modelers only.

WARNING: Drag and speed run setups are inherently abusive and extremely hard on all electronic components. Every component in the configuration can be strained, weakened (or worse) without using extreme caution, observance of electric theory and advanced knowledge of all aspects of the RC hobby. High speed runs and drag racing are the most advanced, aggressive and volatile applications in the RC car hobby. Improper setup or use of this product can result in catastrophic failures of the motor, ESC and/or batteries. As such, there is no warranty for any Castle electronics (including the ESC) when used in conjunction with this motor.

We’ve outlined important product use information below; following these guidelines will significantly reduce failures and increase your happiness and excitement. If you have any questions, just give us a call; we have real people right here in the USA ready to help you get the most (as safely as possible) from your setup.

 

Technical Specs
Input Voltage Range: Min: 4s LiPo
Max: 8s LiPo (33.6V)
Kv: 2400
Max. RPM: 90,000
Size: Diameter: 1.87” (47.6mm) at fins, 46mm at can.
Length: 101.2mm
Weight (w/wires): 816.4g (28.8oz)
Shaft Size: Length: 22mm
Diameter: 8mm
Mounting Hole Specifications: M3 and M4 @ 25.4mm (1")
Cooling Fan: N/A
Connectors: 8mm male bullets on 8 gauge wire
Items Needed for Operation: Compatible Electronic Speed Control (ESC)
0 stars based on 0 reviews