C27471ORANGE Orange RC Ball Joint Tool, Turnbuckle Tool & Ball End Remover (Integy)

C27471ORANGE Orange RC Ball Joint Tool, Turnbuckle Tool & Ball End Remover

OVERVIEW
Stop using needle-nosed pliers, flathead screwdrivers, or other methods to remove your vehicle ball ends and start using the right tool - specifically our new RC Ball Joint Tool, Turnbuckle Tool & Ball End Remover. The ball joint tool ends can pop off 5mm and 6mm ball ends, and the center slot can help adjust turnbuckles between 4mm and 8mm. The ball joint tool is available in blue, green, grey, orange, purple, red, or silver.

NOTE: Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.

Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design limitations. for multiple-fitment items, some parts may not be used based on application.