| Part Number: |
RRP7960 |
| Quantity In Stock: |
2 |
RRP7960 Gen3 Slipper Kit Steel Spur Backplate 60T
ROBINSON RACING PRODUCTS
Robinson Racing GEN3 Slipper Units are over-engineered to meet the punishing demands of the most powerfull brushless motor systems! GEN3 Slipper Units will not fail under the enormous load conditions of todays brushless motor systems. The new GEN3 Slipper Unit is a captured design to prevent slipper pad blowout and deliver maximum power to the ground. The hi-performance hardened steel spur gear will not fail or strip. Aircraft grade billet aluminum backplate will not bend or break. Increased surface area of the oversized pad insures dependable performance. Less total parts reduces flex and wobble in the spur gear and slipper unit.
|
|
| |
| Extra Heavy Duty GEN3 Slipper Units |
|
|
BLACKENED HARDENED STEEL SPUR GEAR
Precision machined, hardened steel spur, with a blackened finish that improves lubricity (the capacity to reduce friction) and anti-galling (metal cracking/breaking from friction) characteristics resulting in better mating surfaces and smoother running gears. With an extra heavy duty .8 module/32 pitch tooth profile, don't be afraid to pour on all the power you got. 3S LiPO's no problem!
SOLID BILLET ALUMINUM BACKPLATE
The backplate is 100% machined from airplane grade solid billet aluminum making it very strong and very hard. It will not warp or break. The backplate uses a captured design to hold the extra thick slipper pad solidly in place.
READY FOR HI-PERFORMANCE FUN??
Instructions and some RRP decals are also included in the kit. Hop-up your E-REVO and unleash the power and the FUN!!!
TECH NOTE: You're going to need a pinion gear to match this spur gear. See the motor pinions listed below for a selection of extra hard high carbon steel 5M/M bore motor pinions we recommend to use with the GEN3 Slipper Units.
TECH NOTE: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.
|
|
Includes:
- (1) Spur Gear
- (1) Slipper plate
- (1) Brass bushing
- (1) Center bearing
